PULSEDIV=3_DIV_16_X_BAUD_RATE, IRDAINV=INVERTED, FIXPULSEEN=DISABLED, IRDAEN=IRDA_MODE_IS_DISABLE
IrDA Control Register. Enables and configures the IrDA (remote control) mode.
| IRDAEN | IrDA mode enable 0 (IRDA_MODE_IS_DISABLE): IrDA mode is disabled, USARTn acts as a standard USART. 1 (IRDA_MODE_IS_ENABLED): IrDA mode is enabled. |
| IRDAINV | Serial input inverter 0 (INVERTED): The serial input is not inverted. 1 (NOT_INVERTED): The serial input is inverted. This has no effect on the serial output. |
| FIXPULSEEN | IrDA fixed pulse width mode. 0 (DISABLED): IrDA fixed pulse width mode disabled. 1 (ENABLED): IrDA fixed pulse width mode enabled. |
| PULSEDIV | Configures the pulse width when FixPulseEn = 1. 0 (3_DIV_16_X_BAUD_RATE): 3 / (16 x baud rate) 1 (2_X_TPCLK): 2 x TPCLK 2 (4_X_TPCLK): 4 x TPCLK 3 (8_X_TPCLK): 8 x TPCLK 4 (16_X_TPCLK): 16 x TPCLK 5 (32_X_TPCLK): 32 x TPCLK 6 (64_X_TPCLK): 64 x TPCLK 7 (128_X_TPCLK): 128 x TPCLK |
| RESERVED | Reserved, user software should not write ones to reserved bits. The value read from a reserved bit is not defined. |